Appliance Repair in Dayton, OH
When your refrigerator stops cooling or your washer refuses to spin, it throws off your whole day. Getting fast, dependable help from a trusted appliance repair service in Dayton, OH makes it easier to get things back to normal without added stress. Small issues can quickly turn into bigger problems if they are left unchecked.
At Logan Master Appliance, we have been serving homeowners throughout Dayton, OH for decades, bringing hands-on experience with everything from refrigerators and ovens to dishwashers, washers, and dryers. Our local expertise means we understand the common appliance problems in the area and know how to diagnose them efficiently. If you are looking for friendly, knowledgeable help, schedule your appliance repair service with Logan Master Appliance today and get your home running smoothly again.
To schedule, call (937) 252-5000 or fill out our service form. When you call, have the appliance brand and model number ready so we can come prepared with the right tools and replacement parts. Once your technician arrives, they will diagnose the problem, explain repair options, and test the unit before leaving.
Kitchen Appliances
Refrigerator Repair
- Fridge not cooling or cooling unevenly: Cooling trouble can come from the compressor, fans, sensors, or blocked airflow. We check temperatures and airflow, then test the parts that control cooling.
- Freezer works, but the fridge is warm: This often points to poor airflow between compartments, an evaporator fan issue, a stuck damper, or frost blocking vents. We inspect the air path and the parts that move cold air into the fresh-food section.
- Water leaking inside or under the unit: Leaks may come from a clogged defrost drain, cracked water line, faulty valve, or drain pan problems. We trace the source and clear the blockage or change out the failed part.
- Loud buzzing, clicking, or humming: Unusual noises may be caused by a failing fan motor, ice buildup hitting a fan blade, loose panels, or a problem with the compressor's start relay. We pinpoint the sound and fix the cause.
- Ice maker not making ice or not dispensing properly: The issue may be related to water supply, a clogged filter, a bad inlet valve, a frozen fill tube, or a failed ice maker module. We verify water flow and repair the part that is not working.
Freezer Repair
- Food thawing or not staying frozen: When the freezer can't hold temperature, the cause may be compressor or sealed-system issues, airflow restrictions, or a control failure. We confirm temperatures and test the cooling controls.
- Heavy frost accumulation: Frost in the freezer often means warm air is getting in through a worn gasket, or the defrost system isn't running. We check the door seal, test the defrost cycle, and remove frost safely.
- Temperature swings: Fluctuations can come from sensors, controls, airflow restrictions, or doors not sealing tightly. We check calibration and examine the parts that regulate temperature.
- Door seal problems: A torn or warped gasket lets warm air in, raising temps and creating frost. We inspect the seal and alignment and swap out parts if needed.
Dishwasher Repair
- Dishwasher not draining: A clogged filter, blocked drain hose, failed drain pump, or disposal connection issue can prevent draining. We check the drain path and pump operation, then clear the clog or switch out the faulty part.
- Dishes come out dirty: This can happen when spray arms are blocked, water isn't heating, detergent isn't dispensing, or the unit isn't filling correctly. We test wash performance and correct the issue.
- Leaking from the door or from the bottom: Leaks may be caused by a worn door gasket, damaged seal, loose hose, or cracked pump housing. We find the leak source and repair the seal or change out the failed component.
- Dishwasher won't start or stops mid-cycle: Door latch switches, control boards, float switches, or power issues can interrupt a cycle. We test safety switches and controls to restore normal operation.
- Error codes: Codes often point to heating, draining, sensor, or control problems. We validate the error code and fix the underlying issue.
Oven, Range, Cooktop, and Stove Repair
- Oven not heating or overheating: Elements, igniters, sensors, or control boards can fail, leading to weak heat or unsafe temps. We measure output and identify the failed part.
- Uneven baking: Hot spots can come from sensor problems, airflow issues, or failing elements. We test temperature accuracy and correct the cause.
- Burner will not light (gas) or won't heat (electric): Gas issues can involve igniters, switches, or gas flow, while electric issues can involve elements, receptacles, or controls. We test ignition or power based on the unit type.
- Display, keypad, or control issues: A dead display or unresponsive buttons may be a control board, touch panel, wiring, or power issue. We verify power and signals to identify the failed part.
- Strange smells or electrical arcing (stop using immediately and call a professional): Burning smells or arcing can signal unsafe electrical or gas conditions. Turn the appliance off and call for service.
Microwave Repair
- Runs but does not heat: This is often a high-voltage component or control issue. We check the heating system and safety circuits to locate the failure.
- Electrical arcing inside the microwave (stop using immediately and call a professional): Arcing can be caused by a damaged waveguide cover, metal contact, or internal component issues. Stop using the microwave and call for service.
- Turntable not turning: This can be a motor, coupler, roller guide, or control issue. We test the drive system and replace the failed part.
- Door switch or latch problems: If the door doesn't latch correctly, the microwave may not run or may stop mid-cycle. We inspect and test the interlock switches and latch parts.
Vent Hood / Range Hood Repair
- Fan not working or weak airflow: A failing motor, clogged filter, blocked venting, or faulty switch can reduce airflow. We check the fan, filters, and vent path to restore exhaust.
- Loud noise or vibration: Rattling can come from loose mounting, worn fan blades, or motor issues. We find the vibration source and secure or change out parts.
- Lights not working: This can be a bulb, socket, switch, or wiring issue. We test the circuit and repair the faulty component.
Garbage Disposal Repair and Replacement
- Humming but not spinning: A jammed impeller or seized parts can cause humming. We confirm the jam, clear it safely, and check whether replacement parts are needed.
- Jammed disposal: Food debris or foreign objects can lock the unit. We remove the obstruction and confirm the disposal spins freely.
- Leaks under the sink: Leaks can come from worn seals, cracked housings, loose drain connections, or plumbing issues. We identify the leak point and repair or switch out the faulty part.
- Garbage disposal not working: Resets, switches, wiring, or internal failure can keep it from turning on. We check the reset, verify power, and test the unit to determine the fix.
Trash Compactor Repair
- Trash compactor will not start: A door switch, start switch, wiring, or motor issue can keep it from starting. We test safety switches and power to pinpoint the failure.
- Trash compactor will not compact: A worn drive mechanism, motor problem, or broken linkage can inhibit compaction. We inspect the drive system and install a new part.
- Drawer won't open or close: Tracks, rails, or alignment issues can bind the drawer. We adjust alignment and repair the slide system.
Wine Cooler Repair
- Wine cooler not cooling: Cooling problems can come from fans, thermostats, sensors, or sealed-system issues. We check the cooling cycle and airflow to find the cause.
- Temperature swings: Fluctuations can come from control issues, airflow restrictions, or door seal problems. We test temperature control and correct the problem.
- Loud operation: Noise may come from a fan motor, vibration, or compressor-related issues. We identify the source and address it.
Laundry Appliances
Washer Repair
- Washer not draining: A clogged pump filter, blocked hose, or failed drain pump can keep the washer from draining. We check the drain system and switch out the failed part if needed.
- Washer not spinning: This can be caused by lid or door locks, belts, motors, control boards, or imbalance detection problems. We test the spin system and safety locks to restore operation.
- Leaking: Leaks can come from hoses, pumps, door seals, or tub-related issues. We find the leak source and repair the seal or change the leaking part.
- Shaking or banging: Excess movement can come from worn suspension parts, leveling issues, or load balance problems. We check stabilization components and level the unit if needed.
- Washer won't start or won't fill: Door locks, controls, or inlet valves can prevent starting or filling. We test the start circuit and water inlet system.
Dryer Repair (Electric and Gas)
- Dryer not heating: Electric dryers may have element or thermostat issues. Whereas gas dryers may have igniter, gas valve, or flame sensor issues. We test the heating system based on dryer type.
- Takes too long to dry: Restricted airflow, vent problems, or weak heat can lengthen dry times. We check airflow, venting, and heating performance.
- Dryer won't start: A door switch, belt switch, thermal fuse, motor, or control issue can prevent start-up. We test the start circuit and safety switches.
- Dryer stops mid-cycle: Overheating from restricted airflow, failing sensors, or control issues can stop cycles early. We inspect venting and temperature controls.
- Burning smell (stop using immediately and call a professional): A burning odor can signal lint accumulation, overheating, or electrical issues. Stop using the dryer and call for service.
Stacked Laundry and Washer-Dryer Combo Repair
- Drain and spin issues: Shared controls and tight-access parts can affect draining and spinning. We test the lock, pump, motor, and controls to find the failure.
- Heating issues: Heat loss can be caused by airflow restrictions, heater problems, or control faults. We check heating output and airflow.
- Control and error code issues: Error codes often point to sensor, lock, drain, or heating faults. We validate the code and repair the cause.
Ice and Specialty
Ice Maker Repair
- Not making ice: This can be a water supply issue, failed valve, frozen fill tube, or ice maker module problem. We confirm water flow and test the ice maker system.
- Slow ice production: Low water flow, temperature issues, or partial blockages can slow output. We check freezer temperature, water supply, and ice maker operation.
- Leaking water: Leaks can come from a cracked line, loose fitting, or valve issue. We trace the source and repair the connection or swap out the failed part.
- Dispensing problems: Jams, failed motors, switches, or ice accumulation can prevent the ice from dispensing. We inspect the dispenser system and restore normal operation.
Ice Machine Repair
- Not producing ice: Water supply problems, sensor issues, or component failure can stop production. We test water flow and the ice-making cycle.
- Poor ice quality: Cloudy, misshapen, or small ice can result from water issues, scale deposits, or temperature control problems. We check the system and recommend the right fix.
- Leaks or drainage issues: Drain blockages, pump issues, or cracked lines can cause leaks. We inspect the drain system and repair the faulty parts.
What to Expect During a Service Call
Schedule
You can schedule service online or by phone. With these details, we can prioritize your service and come equipped with the right tools to resolve the issue:
- Appliance type (refrigerator, washing machine, oven, etc.)
- Brand and model number
- What's happening and when it started
- Your address and the best phone number for updates
Diagnose
Once the technician arrives onsite, they inspect the appliance, confirm the symptoms, and identify the cause. You get a clear explanation of what failed and what needs to happen next. If a part is needed and isn't available right away, the skilled technician outlines what is needed and can schedule a follow-up visit if necessary.
Repair and Test
After approval, the experienced technician completes the repair and tests the appliance. If the job requires a return visit, the next steps are clearly reviewed before the technician leaves.
Warranty and Follow-Up
Warranty coverage depends on the repair and the parts used. During the visit, the technician explains what coverage applies.
After the repair is complete, your technician will go over:
- What was fixed: A summary of what failed, what was replaced or adjusted, and what was tested.
- Care tips: Simple steps, when relevant, such as cleaning filters or keeping vents clear.
- What to do if the same problem returns: Give us a call and share the appliance type, brand, model number, and the symptom. We will help with next steps and schedule follow-up service if needed.
Questions about coverage? Call (937) 252-5000 with your service date and appliance details.
Why Choose Logan Master Appliance
Serving Dayton since 1905
Logan Master Appliance has served customers in Dayton for generations. When you work with us, you're teaming up with a long-standing local company with deep roots in the Miami Valley.
In-house technicians
Service is always handled by Logan Master Appliance technicians, not subcontractors. The same team supports scheduling, diagnosis, and repair from start to finish.
Bonded and insured
All of our skilled technicians are bonded and insured, giving you added protection while work is performed in your home.
Experience across major appliances and brands
Our team repairs common major home appliances and works with major brands such as Bosch, Speed Queen, Maytag, KitchenAid, GE, Whirlpool, Frigidaire, and Amana. Because of the wide range of brands we work with, it is recommended to have your brand and model number ready during your initial call to speed up scheduling.
Service Area
Logan Master Appliance provides appliance repair in:
Not sure if you are within our service area? Call (937) 252-5000 and we will confirm scheduling options.
FAQs
Schedule Your Appliance Repair Today
Fast, reliable service from Dayton's trusted appliance repair experts since 1905.